PicoLog 1000 Series

High-speed, voltage-input data logger. High channel count combined with fast sampling. Low cost per channel. The external terminal board (optional) allows easy connection.

PicoLog 1000 Series
  • *Model (Resolution|Channels)

    Terminal Board

    Terminal Board

Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 Multichannel DAQ Series features independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

Multichannel data acquisition (DAQ)

  • Up to 16 input channels per data logger
  • Up to 4 output channels per data logger
  • Use up to 20 data loggers at the same time
  • Up to 1 MS/s sample rate
  • USB connected and powered
  • Data acquisition software and SDK included

Specifications

Input
ModelPicoLog 1012PicoLog 1216
Analog inputs1216
Resolution10 bits12 bits
Accuracy1% of full scale0.5% of full scale
Maximum sampling rates:
PicoScope
PicoLog
PicoSDK (block mode)
PicoSDK (streaming)

1 MS/s *
1 kS/s **
1 MS/s *
100 kS/s *
Capture memory
PicoScope (and PicoSDK block mode)
Sample rates over 100 kS/s:
Lower sample rates:
PicoLog (and PicoSDK streaming mode):


8000 samples [1]
1 million samples [1]
Up to available PC storage
Analog bandwidth (-3 dB)DC to 70 kHz
Input typeSingle-ended, unipolar
Input voltage range0 to +2.5 V
Overvoltage protection30 V to ground
Input couplingDC
Input impedance1 MΩ

Output
Digital outputs (D0...D3)24 ***
Digital outputs (PWM)
Period
Duty cycle
None1
100 µs to 1800 µs
Adjustable from 0% to 100% in 1% steps
Digital outputs (all)
Logic low voltage
Logic high voltage
Current limit

100 mV (typical)
3.3 V
1 kΩ resistors in series with outputs
Power output for sensors2.5 V @ 10 mA, current-limited

* Shared between active channels.
**Per active channel
***Except in ADC-11 compatibility mode. Please see the PicoLog 1000 Series User's Guide.

Documents